Nickel Alloy Inconel 718 Pipes and Tubes Manufacturer in India

Nickel Alloy Inconel 625 Pipes and Tubes Specifications

Nickel Alloy Inconel 625 Pipes and Tubes Chemical Composition

Limits per ASTM B444 for UNS N06625.

Nickel Alloy Inconel 625 Pipes and Tubes Mechanical and Physical Properties

Thermal conductivity is low, so 625 tube moves heat slowly compared with stainless steel. Allow for this in exchanger design.

Nickel Alloy Inconel 625 Pipes and Tubes Standards

Nickel Alloy Inconel 625 Pipes and Tubes must meet the applicable ASTM, ASME, and project specifications for dimensions, manufacturing, testing, and material quality. The following table outlines the key standards used for Inconel 625 pipes, tubes, and related products.

Manufacturers and suppliers should confirm the required product form, grade, dimensions, testing, and documentation before accepting an order. Hydrostatic or eddy-current testing, positive material identification (PMI), EN 10204 3.1 material test certificates, and third-party inspection can be specified where applicable. Sour-service compliance must also be verified against the project's exact conditions and material requirements.

Grade 1 vs Grade 2: Which Condition of Nickel Alloy Inconel 625 Pipes and Tubes Do You Need?

ASTM B444 offers 625 in two conditions, and the difference matters.

Grade 1 gives higher strength and suits most corrosion and pressure work. Grade 2 has a coarser grain and is the right choice when the pipe will run at high temperature and creep matters. Name the grade on your purchase order. If you leave it out, the supplier has to guess.

Nickel Alloy Inconel 625 vs Incoloy 825 vs Hastelloy C-276

Engineers often choose between these three corrosion-resistant nickel alloys.

625 is the strongest of the three and the standard pick for seawater and offshore work. C-276 beats it in hot, strongly reducing acids. 825 is the lower-cost choice for sulfuric and phosphoric acid duty.

Corrosion Resistance and Temperature Limits of Nickel Alloy Inconel 625 Pipes and Tubes

In seawater, 625 resists pitting and crevice attack at ambient temperature, and it handles chloride stress corrosion cracking and hot brine better than stainless steels or duplex. It also holds its strength and toughness at cryogenic temperatures. In clean, oxidizing air, it resists scaling up to roughly 980 °C.

Temperature has a trap. Long exposure between about 600 and 900 °C can cause precipitates to form, which reduces ductility and toughness. For that reason, most strength-based designs keep continuous service near 650 °C or lower, and Grade 2 is chosen for creep-range service. Fatigue strength is good, which suits cyclic pressure duty. 625 is not the best pick for hot, strongly reducing acids such as concentrated hydrochloric acid, where C-276 does better. Sulfur-bearing atmospheres at high temperature should also be avoided.

Nickel Alloy Inconel 625 Pipes and Tubes Manufacturers and Suppliers in India

When selecting Nickel Alloy Inconel 625 Pipes and Tubes Manufacturers and Suppliers in India, checking the correct ASTM standards helps ensure the products meet project requirements. ASTM B444 covers seamless Inconel 625 pipes and tubes, ASTM B705 covers welded pipes, ASTM B704 covers welded tubes, and ASTM B829 specifies general requirements for nickel and nickel-alloy seamless pipes and tubes.

We focus on product quality, heat treatment records, inspection, and material traceability. We also supply Inconel 625 tubes, flanges, fittings, and plates to support industrial projects with compatible materials and specifications. Whether the requirement involves standard dimensions or project-specific orders, we provide products according to applicable standards, with material test certificates and inspection documentation available as required.

Nickel Alloy Inconel 625 Pipes and Tubes Size and Weight Chart

Weight per metre = (OD − wall) × wall × 0.0265, with OD and wall in mm. This uses a density of 8.44 g/cm³. Treat the numbers as estimates, since wall tolerance moves the real weight.

Pipes (wall in mm / weight in kg/m)

Tubes

For any other size, we can send a full weight chart on request.

Nickel Alloy Inconel 625 Pipes and Tubes Common Materials

As a Nickel Alloy Inconel 625 Pipes and Tubes Manufacturer and Supplier in India, we manufacture, supply, and export products made from UNS N06625, also known as Inconel 625, Alloy 625, and Nickel 625. These nickel-chromium-molybdenum-niobium products meet industrial requirements for corrosion resistance, mechanical strength, and reliable performance in demanding environments.

We supply Nickel Alloy Inconel 625 Pipes and Tubes in different sizes, wall thicknesses, and product forms according to project specifications. Material test certificates, inspection reports, and supporting documentation are available as required to ensure material traceability and quality compliance.

Nickel Alloy Inconel 625 Pipes and Tubes Applications

• Subsea and Offshore Oil and Gas: Risers, flowlines, manifolds and topside piping.
• Sour Gas Production: Wellhead and process lines that meet NACE sour-service requirements.
• Chemical Processing: Lines handling chlorides, acids and mixed corrosive streams.
• Seawater Systems: Cooling, firewater, injection and desalination piping.
• Aerospace: Ducting, exhaust and fuel system parts.
• Power Generation and Scrubbers: Flue gas desulfurization piping and boiler parts.
• Nuclear Power: Reactor components and instrumentation lines.
• Heat Exchangers: Tube bundles in corrosive, high-pressure duty.

Why Choose Us as Your Nickel Alloy Inconel 625 Pipes and Tubes Manufacturer in India?

Choose us for over 20 years of industry experience, flexible supply capabilities, and a product range designed to meet demanding industrial requirements. Established in 2005, we understand the material properties, manufacturing requirements, and applicable standards for Nickel Alloy Inconel 625 Pipes and Tubes used in corrosive and high-temperature environments.

As an experienced Nickel Alloy Inconel 625 Pipes and Tubes Supplier in India, we offer seamless and welded products in various sizes, diameters, wall thicknesses, and lengths, according to project specifications. Our supply capacity of up to 100 metric tons per month supports bulk orders and project-based requirements, while our export network serves customers in more than 85 countries. We follow applicable ASTM and ASME specifications, with material testing, inspection, and certification available as required. Our ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, and applicable TÜV certifications reflect our commitment to quality, traceability, and responsible operations. We also supply other nickel alloys, stainless steel, duplex, super duplex, carbon steel, and alloy steel products to support diverse industrial needs.

Countries We Export Nickel Alloy Inconel 625 Pipes and Tubes To

As a Nickel Alloy Inconel 625 Pipes and Tubes Manufacturer and Supplier in India, we serve offshore operators, chemical plants, marine contractors and EPC firms in 85+ countries. Key export regions include:

North America: USA, Canada, Mexico

Europe: Norway, United Kingdom, Germany, France, Italy, Netherlands, Spain

Middle East: UAE, Saudi Arabia, Qatar, Oman, Kuwait, Bahrain

Asia-Pacific: Singapore, Malaysia, Indonesia, Australia, Japan, South Korea, Vietnam

Africa: South Africa, Nigeria, Egypt, Angola, Ghana

South America: Brazil, Argentina, Chile, Guyana

Every shipment carries EN 10204 3.1 mill test certificates, and 3.2 certification or third-party inspection can be arranged on request. Pipes and tubes leave with capped ends, protective wrapping and bundled or crated packing for sea freight. We prepare the commercial invoice, packing list and test certificates to suit your port and customs rules.